/[projet1]/public/pc/tools/osdk/main/Osdk/_final_/Oricutron/oricutron.cfg
Defence Force logotype

Contents of /public/pc/tools/osdk/main/Osdk/_final_/Oricutron/oricutron.cfg

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1353 - (show annotations)
Sun Jan 17 12:49:38 2016 UTC (3 years, 8 months ago) by dbug
File size: 4878 byte(s)
Fixed the Oricutron config file to allow the use of Jasmin drives
1 ;
2 ; Example config file for Oricutron
3 ;
4
5 ; ----------------------------------
6
7 ; ROM files. (NOTE: For roms, DO NOT include the ".rom" file
8 ; extension. These are added automatically.
9 ; If a file with the same name, but with a ".sym" extension
10 ; is found, symbols will be loaded from it and used in the
11 ; debugger when the ROM in question is active.
12
13 ; Filename of Oric Atmos ROM
14 atmosrom = '../Roms/basic11b'
15
16 ; Filename of the Oric-1 ROM
17 oric1rom = '../Roms/basic10'
18
19 ; Filename of the Microdisc ROM
20 mdiscrom = '../Roms/microdis'
21
22 ; Filename of the Jasmin ROM
23 jasminrom = '../Roms/jasmin'
24
25 ; Filename of the Pravetz 8D ROM
26 pravetzrom = '../Roms/pravetzt'
27
28 ; Filename of the Pravetz 8D ROM
29 pravetz8drom = '../Roms/8dos'
30
31 ; Filename of ROMs for the telestrat banks
32 telebank0 = ''
33 telebank1 = ''
34 telebank2 = ''
35 telebank3 = ''
36 telebank4 = ''
37 telebank5 = '../Roms/teleass'
38 telebank6 = '../Roms/hyperbas'
39 telebank7 = '../Roms/telmon24'
40
41 ; ----------------------------------
42
43 ; Type of machine to emulate (atmos, oric1, oric1-16k, telestrat, pravetz)
44 machine = atmos
45
46 ; ----------------------------------
47
48 ; Type of disk controller (none, microdisc, jasmin, pravetz)
49 disktype = none
50
51 ; Write back all changes to disk images (if turned off, you have to press
52 ; F7 to write changes back to the disk image)
53 diskautosave = yes
54
55 ; ----------------------------------
56
57 ; Start with this disk in drive 0 (backslash is an escape char to insert
58 ; quotes, so double backslash is required to insert a backslash. You can use
59 ; forward slash as a path seperator, even on windows.
60 ;diskimage = 'disks/barbitoric.dsk'
61
62 ; ----------------------------------
63
64 ; Default path for tapes
65 ;tapepath = 'tapes'
66
67 ; Default path for atmos/oric-1 disks
68 ;diskpath = 'disks'
69
70 ; Default path for telestrat disks
71 ;telediskpath = 'teledisks'
72
73 ; Default path for pravetz disks
74 ;pravdiskpath = 'pravdisks'
75
76 ; ----------------------------------
77
78 ; Start with this tape inserted
79 ;tapeimage = 'tapes/cyclotron.tap'
80
81 ; ----------------------------------
82
83 ; Start Oricutron in the debugger? (yes/no)
84 debug = no
85
86 ; Load these symbols into the debugger
87 ;symbols = 'd:/osdk/my project/build/symbols'
88
89 ; ----------------------------------
90
91 ; Render mode (soft, opengl)
92 rendermode = soft
93
94 ; Show scanlines? (yes/no)
95 scanlines = no
96
97 ; Horizontal stretch? (yes/no) <-- opengl only
98 hstretch = yes
99
100 ; PAL ghosting? (yes/no) <-- opengl only
101 palghosting = yes
102
103 ; Start fullscreen?
104 fullscreen = no
105
106 ; Tell SDL to use a hardware surface? (might increase speed in fullscreen, or
107 ; it might do nothing, or it might make it worse). (software rendering only)
108 hwsurface = no
109
110 ; Force video display bit depth, either 16 or 32 (on some hardware, 16 can
111 ; extremely slow, ie. eeepc clones). Normally Oricutron will guess the best
112 ; one, but if it seems to be slow, try setting this to 16 or 32 to see if
113 ; it makes a difference. (software rendering only)
114 ;swdepth = 16
115
116 ; ----------------------------------
117
118 ; RAM pattern on powerup (0 or 1)
119 rampattern = 0
120
121 ; ----------------------------------
122
123 ; Lightpen (yes/no)
124 lightpen = no
125
126 ; ACIA emulation back-end name:
127 ; 'none' - no serial present
128 ; 'loopback' - for testing - all TX data is returned to RX
129 ; 'modem[:port][:ipv6]' - emulates com port with attached modem,
130 ; only minimal AT command set is supported and
131 ; data is redirected to TCP. Default port is 23 (telnet).
132 ; if :ipv6 is added at the end uses IPv6 instead of IPv4
133 ; 'com:115200,8,N,1,<device>' - use real or virtual <device> on host as emulated ACIA
134 ; baudrate, data bits, parity and stop bits can be set as needed
135 ; ex.: Windows: 'com:115200,8,N,1,COM1'
136 ; Linux: 'com:115200,8,N,1,/dev/ttyUSB0'
137 serial = 'none'
138
139 ; Joystick interface for Atmos/Oric-1 mode. Telestrat has its own built-in standard.
140 ; Options are 'none', 'altai', 'pase' or 'ijk'
141 joyinterface = none
142
143 ; How to emulate joysticks attached to the above interface
144 ; Options are 'none', 'kbjoy1', 'kbjoy2', 'sdljoyN' (where n is 0 to 9)
145 joystick_a = kbjoy1
146 joystick_b = none
147
148 ; How to emulate joysticks attached to the telestrat
149 ; Options are 'none', 'kbjoy1', 'kbjoy2', 'sdljoyN', 'mouse'
150 telejoy_a = kbjoy1
151 telejoy_b = none
152
153 ; Keys to emulate joystick, set 1
154 ; NOTE: "fire2" is only available on telestrat
155 kbjoy1_up = 'KP8'
156 kbjoy1_down = 'KP2'
157 kbjoy1_left = 'KP4'
158 kbjoy1_right = 'KP6'
159 kbjoy1_fire1 = 'KP_ENTER'
160 kbjoy2_fire2 = 'KP_PLUS'
161
162 ; Keys to emulate joystick, set 2
163 kbjoy2_up = 'W'
164 kbjoy2_down = 'S'
165 kbjoy2_left = 'A'
166 kbjoy2_right = 'D'
167 kbjoy2_fire1 = 'SPACE'
168 kbjoy2_fire2 = 'N'
169
170 ; Visual keyboard
171 ;show_keyboard = yes
172 ;sticky_mod_keys = yes
173 ;autoload_keyboard_mapping = 'keymap/my_keymap.kma'

  ViewVC Help
Powered by ViewVC 1.1.26